EAGLE TECHNOLOGY

SHIVA ETHERPORT IIT

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      NuBus
Topology      Linear Bus
Wiring Type   Unshielded twisted pair
Boot ROM      Not Available

[Image]

                                CABLE TYPE

  Cable type is automatically determined by the card. If both the RJ45
  and AUI ports are used, the card will default to RJ45.

  FACTORY CONFIGURED SETTINGS

     Jumper         Setting

  SW1/Switch 1        Off

                              SIGNAL QUALITY

                Setting                           SW1/Switch 2

        Signal quality test enabled                    Off

  »     Signal quality test diabled                    On

                              LINK INTEGRITY

                Function                           SW1/Switch 3

  »        Link intergity enabled                      Off

          Link integrity disabled                       On

  Note: If card is used in a pre-10BaseT cabling network, disable the
  link integrity function.

                       REVERSED POLARITY CORRECTION

                Setting                            SW1/Switch 4

  »      Reverse polarity correction                    Off
                   enabled

         Reverse polarity correction                    On
                  disabled

                 DIAGNOSTIC LED(S)

        L1                   Condition

        On         10BaseT link integrity exists

       Off         10BaseT link integrity broken